REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
			Technical data
			Electrical circuits
			Charging System
			Checking the charging circuit
			Check the voltage drop across the wire that connects the battery to the alternator
			Check of the current generated by the generator
			Check voltage release
			Generator
			Accumulator battery
			Check the specific gravity of the electrolyte
			Charging the battery
			Inspection of battery
			Starting system
			Starter
			Check and replacement of elements of the stator
			Switch the ignition lock
			Check the starter relay
			Check the ignition switch lock
			Radio
			Speakers
			Antenna
			Multifunction switch
			Sound signal
			Circuit breakers
			Device combination
			Windshield Wiper Motor
			Replacement lights and front turn signal
			Adjusting headlights
		Appendix
		Wiring

Antenna

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
	2. Remove the rear transverse trim and upholstery on the left-rear side of the trunk.
	3. Unscrew the nut on the bolt and remove the antenna. Disconnect the antenna cable and wire supply voltage to the antenna.
4. Install in the reverse order of removal.

Check antenna

PERFORMANCE ORDER

1. Disconnect the antenna.
2. Check up, whether permanent battery voltage to terminals 1 and 3 of the connector.
	3. Check whether the supplied battery voltage to terminals 1 and 2 of the connector when the ignition and the radio.
4. Additional wires submit the battery voltage on pins 3 and 2, and check if the motor antenna (antenna must be nominated).
	5. Check whether the engine after disconnecting the antenna from the battery contacts 2 (antenna should move down).

« previos page
Speakers