printable version
Changing the oil filter
All engines are equipped with high-quality, disposable oil filter.
A warning When replacing the motor filter, be careful because the oil is hot and may cause burns.
PERFORMANCE ORDER | 1. Special wrench, remove the oil filter. If the rubber sealing ring of the oil filter is left on the cylinder block, remove it. | | 2. Apply a thin layer of engine oil rubber sealing ring of the new oil filter. | 3. Replace the oil filter to a contact of the O-ring of the oil filter to the engine block and tighten it by hand. | 4. Start up the engine and check for oil leaks. | 5. Turn off the engine and wait 5 minutes for draining oil in a pan. Check the engine oil level and, if necessary, finish it to norm. |
|
|