add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Accent
Home
 
Hyundai
Accent
Instructions
Engine
Greasing system
Technical data
Choice of motor oil
Oil pressure sensor
Check engine oil level
Replacing the engine oil
Changing the oil filter
SOHC engine oil pump
The oil pump of engine DOHC
Cooling
Control, reduced toxicity
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Steering
Brakes
Body
Air
Electrical equipment
Appendix
Wiring
 


Hit Counter by Digits


print page printable version

Replacing the engine oil




A warning

When replacing the engine oil, be careful because the oil is hot and may cause burns.


PERFORMANCE ORDER
1. Warm up the engine to normal operating temperature and turn it off.
2. Place the pan to collect the leaked oil.
3. Remove the oil filler cap and remove the oil drain plug from the oil pan. Wait until all the oil has drained from the oil pan.
4. Replace the oil drain plug with a new seal.

Tightening torque: 35-45 N ??? m

5. Fill the engine with the required amount of engine oil required.

The amount of engine oil:
Without oil filter replacement: 3.0 L
With oil filter replacement: 3.3 L

6. Install the cover on the oil filler neck.
7. Start up the engine and check for oil leaks.
8. Check the engine oil level and, if necessary, finish it to norm.




« previos page
Check engine oil level
next page »
Changing the oil filter

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.