REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Elantra
		Gasoline engines 1.6, 1.8 and 2.0 liters
		The diesel engine of 2.0 liters
		Greasing system
		Cooling
		Fuel system
		Control systems and emission control
		Ignition system
		The system of preliminary heating of the diesel engine
		Coupling
		Manual transmission
		Automatic Transmission
		Drive shafts, front and rear axles
		Suspension
		Steering
			Technical data
			Check of a free wheeling of a steering wheel
			Checking steering angle of front wheels
			Check torque pin of the spherical rod end
			Check of effort steering
			Checking the steering wheel return to its original position
			Checking the belt drive power steering pump
			Check the fluid level
			Liquid replacement in a hydraulic drive power steering
			Bleeding the hydraulic system of the power steering
			Checking the fluid pressure in the hydraulic system
			The steering column / steering shaft
			Removing and installing steering column lock
			Steering transfer
			The power steering hoses
			Filling fluid Power Steering
			Power steering pump
			Troubleshooting steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

printable version

Checking the steering wheel return to its original position

Check that the steering wheel is returned to its original position.

PERFORMANCE ORDER

The force that must be applied to the steering wheel and return to the original position should be the same as for the moderate passage turns and reversals.

When the steering wheel is rotated 90 ?� and arrested in this position for a few seconds, while the vehicle is moving at a speed of 35 km / h, after releasing the steering wheel must return to within 20 ?� from the neutral position.

If the steering wheel is turned quickly, the first time the force needed for turning can be increased. This is normal, especially on when the engine is idling, as pump performance somewhat reduced.

« previos page
Check of effort steering

next page »
Checking the belt drive power steering pump