add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Technical data
Check of a free wheeling of a steering wheel
Checking steering angle of front wheels
Check torque pin of the spherical rod end
Check of effort steering
Checking the steering wheel return to its original position
Checking the belt drive power steering pump
Check the fluid level
Liquid replacement in a hydraulic drive power steering
Bleeding the hydraulic system of the power steering
Checking the fluid pressure in the hydraulic system
The steering column / steering shaft
Removing and installing steering column lock
Steering transfer
The power steering hoses
Filling fluid Power Steering
Power steering pump
Troubleshooting steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

The power steering hoses




When connecting pipes and hoses, make sure that combined white label on each item.

Pressure hose and pipe

PERFORMANCE ORDER

  1. Remove the air intake pipe.
  1. Remove the clamp mounting pressure hose.
  1. Disconnect the fittings from the steering gear.
  2. Lift the car and remove the clamp that secures the pressure and the return pipe.
  1. Lower the car and remove the connector (24 mm).
  1. Remove the pressure hose and tube.
  1. Installation is performed in reverse order of removal.
  1. Set the pressure hose and the tube so that they are not twisted and do not touch the movable parts of the vehicle.
  2. Bleed the hydraulic power steering.

Return hose and pipe

PERFORMANCE ORDER

  1. Remove the bracket from the power steering reservoir.
  1. Remove the clamp on the pipe and return hose.
  1. Remove the air intake pipe.
  1. Disconnect the pressure pipe and the return pipe fitting of the steering gear.
  1. Lift the car and remove the clamp that secures the pressure and the return pipe.
  1. Lower the car and remove the clamp securing the return of the tube and hose.
  1. Installation is performed in reverse order of removal.
  1. Set the return hose and the tube so that they are not twisted and do not touch the movable parts of the vehicle.
  2. Bleed the hydraulic power steering.

Check

PERFORMANCE ORDER

  1. Manual twisting the hose, check it for damage or cracks.
  2. Make sure there is no contact between the hose and other vehicle components.




« previos page
Steering transfer		 next page »
Filling fluid Power Steering

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.