REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Elantra
		Gasoline engines 1.6, 1.8 and 2.0 liters
		The diesel engine of 2.0 liters
		Greasing system
		Cooling
		Fuel system
		Control systems and emission control
		Ignition system
		The system of preliminary heating of the diesel engine
		Coupling
		Manual transmission
		Automatic Transmission
		Drive shafts, front and rear axles
		Suspension
		Steering
			Technical data
			Check of a free wheeling of a steering wheel
			Checking steering angle of front wheels
			Check torque pin of the spherical rod end
			Check of effort steering
			Checking the steering wheel return to its original position
			Checking the belt drive power steering pump
			Check the fluid level
			Liquid replacement in a hydraulic drive power steering
			Bleeding the hydraulic system of the power steering
			Checking the fluid pressure in the hydraulic system
			The steering column / steering shaft
			Removing and installing steering column lock
			Steering transfer
			The power steering hoses
			Filling fluid Power Steering
			Power steering pump
			Troubleshooting steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

printable version

Filling fluid Power Steering

PERFORMANCE ORDER

Fill the tank of the power steering fluid to the mark "MAX".
Lift up the front wheels. Periodically turn the starter for 15-20 seconds and at the same time 5-6 times turn a steering wheel from lock to lock with a frequency of 13 ^min -1.
Start up the engine and let it run at idle speed. Turn the steering wheel from stop to stop as long as the reservoir air bubbles will not disappear.
If the color of the liquid is not changed to white and milk, and the fluid level is not reduced, then the power steering mechanism is filled with liquid.

If the steering wheel the fluid level changes, and when the engine is increased, then the air is not completely removed from the liquid. Since this may result in abnormal noise and damage to the pump, repeat the above operation.

« previos page
The power steering hoses

next page »
Power steering pump