add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Technical data
Check of a free wheeling of a steering wheel
Checking steering angle of front wheels
Check torque pin of the spherical rod end
Check of effort steering
Checking the steering wheel return to its original position
Checking the belt drive power steering pump
Check the fluid level
Liquid replacement in a hydraulic drive power steering
Bleeding the hydraulic system of the power steering
Checking the fluid pressure in the hydraulic system
The steering column / steering shaft
Removing and installing steering column lock
Steering transfer
The power steering hoses
Filling fluid Power Steering
Power steering pump
Troubleshooting steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Troubleshooting steering



Sign
Probable Cause
Remedy
Increased free wheeling of a steering wheel Loose connection in the universal joint Tighten
Securely tighten the bolts steering transfer Tighten bolts
Loose or worn tie rod Replace the tie rod end
The steering wheel is hard to turn Insufficient belt tension Adjust the belt tension
Damage to the belt Replace the belt
Add a liquid Low fluid
The air in the fluid Remove air from the fluid
Pinched or damaged hoses Position correctly or replace
Insufficient pressure created by the pump Repair or replace the pump
Sticking pressure control valve Replace
Internal leak in the power steering pump Replace damaged items
Excessive leakage of fluid from the rack and pinion steering gear housing Replace damaged items
Damage to the steering gear housing or a pressure control valve Replace damaged items
The steering wheel does not return to its original position properly Too much time turning the ball rod end Replace the tie rod end
Too tight a universal joint Adjust
Internal connection tie rod or ball joint are turned with difficulty Lubricate or replace the ball joint
Loose fastening of steering transfer bracket Tighten
Worn steering shaft joints or O-ring body Replace
Damaged steering gear Replace steering transfer
Damaged bearing pinion steering gear Replace
Kinked or damaged hoses Replace hoses
Faulty pressure control valve Replace
Damaged bearing shaft power steering pump Replace
Extraneous noise of the steering

The hissing sound of the steering transmission

All Power Steering publish additional noise. One of the most common - a hissing sound when the steering wheel is turned the vehicle is stationary. This sound is most evident when the steering wheel while pressing the brake pedal.

There is no relationship between the noise and the steering. Do not replace the valve if the "hissing" noise does not become extreme. The new valve will also emit a slight noise.

A rattling sound in the steering transmission Backlash between the hose and the car body Route properly and fix hoses
No fixed steering gear Secure the steering gear
Nezakreplen tie rod end and / or the ball joint Tighten
Worn tie rod end and / or the ball joint Replace
The noise in the power steering pump Low fluid Add a liquid
The air in the fluid Bleed
Do not tighten the bolts fastening the pump Tighten bolts

A soft noise should be heard immediately after the engine is started at an air temperature of -20 ?� C. This is due to the properties of the liquid used in the steering amplifier, and not a malfunction.





« previos page
Power steering pump
next page »
Brakes

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.