 printable version
Switch the transmission range and adjustment of the control cable
Move the selector lever to position ?�N?�.
| Fig. 3.28. Location of the adjusting nut (1) fixing the cable (2) to the control lever (3) automatic transmission
|
Loosen the adjusting nut lever for mutual displacement of a cable and lever (Fig. 3.28). Move the lever in position ?�N?�.
| Fig. 3.29. Adjustment of the switch position indication selector lever: 1 - bolts 10-12 Nm; 2 - the control lever; 3 - the case of the switch indicate the position of the selector lever; 4 - hole in the flange; 5 - hole at the end of the control lever
|
Loosen the screws housing the transmission range switch, then turn the switch housing so as to align the hole at the end of the control lever and the hole in the housing flange transmission range switch (Fig. 3.29). Tighten the switch indicating the transmission range torque. Make sure that the position of the switch body is not changed.
| Fig. 3.30. The direction of movement of the cable and the location of the adjusting nut (1) for the control cable to the lever (2)
|
Gently pull the transmission control cable in the direction of the arrow shown in Fig. 3.30, and tighten the adjusting nut to 13 Nm. Make sure that the selector lever is in position ?�N?�. Check the operation and functioning of the switch to each position of the selector lever.
| 
