- Remove the interior door trim and a water filter (see section Removing and installing interior door trim panel).
- Lower the window.
- Having hooked, remove the window opening the door molding and sealing strip (trim).
- At the rear windows give the screws, tilt the glass is still ahead and pull up, pull it out of the door.
 | - Take the screws and remove the trough fixed window glass of a back door.
|
- Give two nuts to guide the window glass and the glass slide to align the pins with the holes in the guide, and then remove the glass.
 | - Loosen the nuts on each end of the rail, push the guide by removing it from the pins and remove the glass from the door.
|
- Raising his glass, remove it from the door through the window opening.
- To install the lower glass door properly position it and tighten the nuts.
|
|
