add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Jeep Grand Cherokee (from 1993 to 1999, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Jeep Grand Cherokee
Home
 
Jeep
Grand Cherokee
Introduction
eleven About this Guide
Cars of mark Jeep Grand Cherokee - Abstract
The vehicle identification number
Purchase Parts
Equipment service, the tool and the workplace equipment
Jacking and towing
Starting the engine from the auxiliary power supply
Automotive chemicals, oils and greases
Troubleshooting
Engine
Electric Motor
Power system
Cooling system
Clutch
Manual box of a gear change (Manual transmission)
Automatic transmission (AT)
Transfer case
The propeller shaft
Bridges
brake system
Suspension and steering
Adjustment and routine maintenance
The straight six-cylinder engine
The V8 engine
Procedure of the general and engine major repairs
Systems of cooling, heating and air conditioning
The power supply system and exhaust
The system of electric motor
Systems of decrease in toxicity of the fulfilled gases and engine management
Manual box of a gear change
Automatic Transmission
Transfer Case
Clutch and transmission line
Brakes
Suspension and steering
Body
The system of on-board electrical equipment
Controls and operation receptions
 


Hit Counter by Digits


print page printable version

Bridges



Background noise

  1. Normal traffic noise. Adjustments can not be.
  2. Tire noise. Check the condition of protectors and pressure of a rating of tires (Head of Adjustment and routine maintenance).
  3. Worn or damaged bearings rear wheels, or diminished the force of tightening (Chapter Clutch and transmission line).

Vibrations

See. The reasons listed in the section on defects of the propeller shaft. Take the same measures to eliminate the causes. If the vibration is not stopped, check the condition of the bearings of the rear wheels, in turn poddomkrachivaya corresponding corner of the vehicle and turning the wheel by hand. Listen thus to sounds coming from the bearing. Remove bearings and check their condition (Chapter Clutch and transmission line).

Oil leaks

  1. Damaged oil seal differential side gear.
  2. Damaged seals the drive shaft (semi-axes) (Chapter Clutch and transmission line).
  3. We have the oil leakage through the inspection cover of the differential. Tighten bolts or replace the gasket (as required) (Heads of Adjustment and routine maintenance and the clutch and transmission line).




« previos page
The propeller shaft
next page »
brake system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.