REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
		Ignition system
		Coupling
		Transmission
			Manual Transmission
				Technical data
				Checking the oil level
				Change of oil
				Replacement of an oil sealing ring
				Removing and installing transmission
				Dismantling, check and transmission assemblage
				Carter couplings and components of the gearbox
				Gearbox output shaft
				The secondary shaft of a transmission
				Selecting shims
				Differential
				The gear change mechanism
			Automatic transmission F4E-K
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment

Change of oil

PERFORMANCE ORDER

1. Lift the car and fix it in a horizontal position.
A warning When checking the oil level of the vehicle must be in a horizontal position.
	2. Remove the oil drain plug located at the end of the transmission and drain the oil into a suitable container. Torque: 40-58 N ??? m
3. Install a new washer on the plug and replace the oil drain plug in place.
	4. After the opening for the drive mechanism of the speedometer in the transmission fill the required number of required oil. Butter: Grade: GL-4 Viscosity: SAE 75W-90 Capacity: 2.80 l
5. Start up the engine and let it run to warm up the transmission oil. Check for leaks of oil from the gearbox.
6. Lower the car.