 printable version
The gear change mechanism
The gear change mechanism 1 - shift knob;
2 - ashtray;
3 - the central panel;
4 - Rear console;
5 - Front console;
6 - Case;
7 - an arm of the shift lever;
8 - draft of a gear change; | 9 - draft of a choice of transfers;
10 - the gear lever;
11 - a spring;
12 - upper hemisphere;
13 - the plug;
14 - lower hemisphere;
15 - Case;
16 - Rubber Bearing. |
Repairs
| PERFORMANCE ORDER | | 1. Dismantling spend in the sequence designated in figures in drawing. | | 2. Check the condition of all details and, if necessary, replace them. | | 3. Reassembly is effected in reverse order of removal. |
|
Installing the thrust choice of transfers
| PERFORMANCE ORDER |  | 1. Establish draft choice of transfers to the bottom of the car, then the gearbox. Tighten the nuts traction gear selection to the gearbox. Torque: 31-46 N ??? m | | 2. Tighten the shift lever arm torque. Torque: 5,8-8,8 N ??? m |
|
Installation of a spring
| PERFORMANCE ORDER |  | Make sure that the end of the spring with a hook is properly installed in the recess bracket as shown. |
|
|
