REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
			Design Features
			Possible engine malfunction, their causes and remedies
			Useful tips
			Compression check in cylinders
			Removal and installation of decorative engine cover
			Removal and installation of mudguards of the engine
			Mount Replacement power unit
			Replacement of a protective timber
			Installation of the piston of the first cylinder to TDC of the compression stroke
			Replacing the timing belt
			Replacing the support rollers and tensioning the timing belt
			Removing, Troubleshooting and installation of a flywheel
			Replacement parts Seal Engine
			The cylinder head of the engine
			Removing and installing engine
			Lubrication system
			Engine cooling system
			Exhaust System Engine
			The power supply system of the engine
				Design Features
				Check the fuel pressure in the fuel system
				Reducing the pressure in the feed system
				Removal and installation of the air filter
				Replacement of the fuel pump
				Replacement of the fuel tank and the filler pipe
				Removing and installing throttle assembly
				Replacement of a regulator of idling
				Removal, installation and check the nozzles and removing the fuel rail
				Checking and replacing the fuel pressure regulator
				Replacement of the throttle cable
				Replacement of an adsorber of system EVAP
				Removal and installation of the purge solenoid valve
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

Removal and installation of the purge solenoid valve

You will need pliers.

1. Disconnect a wire from the plug ?�-?� the storage battery.


3. Click on the clip ...	4. ... and remove the solenoid valve wiring harness connector.


5. Loosen hose clip canister to the connection of the solenoid valve, pressing pliers bent their antennae; slide the hose clamps ...	6. ... and disconnect the hose.


7. Remove the solenoid valve from an arm ...	8. ... and disconnect it from the hose nozzle inlet pipe.

9. Install the canister purge solenoid valve in the reverse order of removal.

next page »
Transmission