REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
			Design Features
			Replacement bumpers
			Removal and installation of a mudguard and front wheel arch liner
			Removing and installing the rear wheel mudguard
			Removal and installation of a forward wing
			Removing and installing bonnet
			Door
			The trunk lid
			Removal and installation of facing the boot
			The fuel filler flap
			Seats
			Supplemental Restraint System
			Rear view mirrors
			Dashboard
				Removal and installation of the glove compartment
				Removal and installation of facing of the upper instrument panel
				Removal and installation of the left lower trim dashboard
				Removing and installing the side facing the dashboard console
				Removal and installation of the right lower instrument panel trim
			Removal and installation of the instrument panel
			Heater and air conditioning
			Interior fittings
			Replacing a windscreen
			Care body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

Removal and installation of the right lower instrument panel trim

You will need a Phillips screwdriver with a blade.

2. Remove the left lower trim panel of devices (see. "Removing and installing left lower trim dashboard").

4. Remove the cigarette lighter and ashtray (see. "Removing and installing a cartridge cigarette lighter").


5. Remove the three screws securing the lining of the glove compartment ...	6. ... the screws of the left ...


7. ... and right fasteners lining under the glove compartment.	8. Remove the screw that secures the liner, which is under the left lower trim.


9. Remove the right instrument panel trim ...	10. ... and unscrew the amplifier facing the instrument panel.


11. Remove the screws of the left ...	12. ... and right mounts right lower trim under the lining of the tunnel.


13. Remove the two screws securing the liner to the frame of the console dashboard.	14. Remove the two screws securing the lining under the cap for radio ...

15. ... and remove the trim.

16. Install the right lower trim panel of devices in the reverse order of removal.