REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
			Design Features
			Replacement bumpers
			Removal and installation of a mudguard and front wheel arch liner
			Removing and installing the rear wheel mudguard
			Removal and installation of a forward wing
			Removing and installing bonnet
			Door
				Removing and installing front door trim
				Replacing the glass front door
				Replacing the outer front door handle lock
				Replacing the front door lock
				Removing and installing front door
				Replacing the terminator of opening the front door
				Removal and installation of an upholstery of a back door
				Replacement glass back door
				Replacing the outer rear door handles
				Replacement lock the back door
				Removing and installing rear door
				Replace the rear door opening limiter
			The trunk lid
			Removal and installation of facing the boot
			The fuel filler flap
			Seats
			Supplemental Restraint System
			Rear view mirrors
			Dashboard
			Removal and installation of the instrument panel
			Heater and air conditioning
			Interior fittings
			Replacing a windscreen
			Care body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

Replacement glass back door

You will need: a screwdriver with a flat blade and Phillips, Allen key "10".

1. Lower the window to the lowest position.


2. Hook screwdriver interior trim and doors, overcoming the resistance of latches, remove it.	3. Remove the three screws that secure the exterior trim door ...


4. ... and remove the cover.	5. Remove the upper mounting bolt rear window guide rail and slide back.

6. Remove the door trim, without disconnecting from the power window switch harness connector (see. "Removing and installing front door trim").

7. Lower the window in a position where there is access to the bolts fastening the glass through technological openings in the door panel.

8. Disconnect the "-" terminals of the battery and disconnect the harness connector from the power window switch.


9. Remove the moisture proof film ...	10. ... remove the two screws on the glass to the window mechanism ...

11. ... and remove the glass from the door, pulling it up to the outside.

12. Install the glass in the reverse order of removal.