REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
			Design Features
			Possible engine malfunction, their causes and remedies
			Useful tips
			Compression check in cylinders
			Removal and installation of decorative engine cover
			Removal and installation of mudguards of the engine
			Mount Replacement power unit
			Replacement of a protective timber
			Installation of the piston of the first cylinder to TDC of the compression stroke
			Replacing the timing belt
			Replacing the support rollers and tensioning the timing belt
			Removing, Troubleshooting and installation of a flywheel
			Replacement parts Seal Engine
				Replacing gaskets cylinder head cover
				Replacing the engine intake manifold gasket
				Replacing cylinder head gasket
				Replacing the oil seal crankcase
				Replacing the engine exhaust manifold gasket
				Replacing the oil seal Camshaft
				Replacing valve stem seals
				Replacing the seals of the engine crankshaft
			The cylinder head of the engine
			Removing and installing engine
			Lubrication system
			Engine cooling system
			Exhaust System Engine
			The power supply system of the engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

Replacing gaskets cylinder head cover

You will need: the key "10" pliers.

1. Disconnect a wire from the plug ?�-?� the storage battery.


4. Disconnect the pipe EGR valve and the pipe from the cylinder head cover crankcase ventilation hoses.	5. Remove the ten bolts ...


6. ... and remove the engine cylinder head cover.	7. Turn the cylinder head cover and remove the pad from the slot cover.

8. Clean and degrease the grooves of the cover and mating surface of the cylinder head.

9. Install all previously removed parts in reverse order, after inserting a new gasket in the cylinder head cover.