add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
Engine
Transmission
Clutch
Manual Transmission
Overview
Checking and changing the oil in a mechanical transmission
Removing and installing speedometer car (without DLD)
Replacing the oil seal (differential)
Removing and installing gearshift
Carter clutch housing demolition elements of the main transfer
Testing and assembly of components of the differential and final drive housing
Installing bearing toothed gears
Assembling the roll pin
Adjust the preload in the bearing
Setting the differential in the clutch
Installing crankcase main gear
Eliminating gaps primary, secondary shaft and the shaft of the differential housing of the main transfer
Measurement of the load of the primary, secondary shaft and the shaft of the differential housing of the main transfer
Automatic transmission
Drive Train
Tables
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Assembling the roll pin



Installing a new roll pin
Fig. 3.53. Installing a new roll pin


Install the new cylindrical pin, as shown in Figure 3.53, to keep the axis of satellites.
Measure the clearance in accordance with the following procedure.
Install the left and right drive shafts in the differential.
Support the drive shafts prisms.

Backlash measurement satellites
Fig. 3.54. Backlash measurement satellites


Measure the clearance of both satellite (Fig. 3.54).
Clearance: 0,050-0,150 mm.
If the measurement results differ from the norm, replace worn or damaged parts.




« previos page
Installing bearing toothed gears		 next page »
Adjust the preload in the bearing

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.