printable version

Body

Body sizes

Dimensional characteristics to verify the geometry of the body

Dimensional characteristics to verify the geometry of the body (for example, 320 ML)

Dimensional characteristics to verify the geometry of the body (for example, 320 ML)

Dimensional characteristics to verify the geometry of the body (for example, 320 ML)

Overview
Body	Self-supporting, with a hard life-saving frame, front and rear energy absorbing deformation zones directed; vnutridvernye applied and onboard amplifiers, preservatives in side collisions. Available in two versions Body: standard and long wheelbase
The bottom and wheel wells	Covered resistant protective mastic.
Designation in the text	Guide pillars (front to back) A, B and C
Side airbags	Above the side windows and all doors
Overall dimensions of the vehicle, mm	See. Specifications to the Head Controls and receptions of safe operation
Adjustable hood and doors
The gaps in the planting of body openings, mm
In addition to the upper tailgate gap	5.0 ?� 0.5
Upper tailgate gap	9.5 ?� 0.5
Mounting dimensions of towing equipment	See. Specifications to the Head Controls and receptions of safe operation
Efforts of a tightening of carving connections, Nanometer
Wiper arm nuts
Windshield	18
Rear window	15
Screws fastening straps bonnet hinge
By the hood panel	10
For body parts	18
Tighten the screws on the upper and lower assemblies bonnet	12
Nuts of fastening of the separating pipe to protect the elements of the lower engine compartment (front bumper)	86
Screw support brackets of the front bumper to the elements of the bottom protection	25
Bolts to the bottom of the front protection protection	25
Nuts of fastening elements to protect the bottom to the support bracket	49
Bolts of fastening elements to protect the bottom to each other	49
Bolts rear section of the bottom protect the engine compartment to the auxiliary frame	10
Nuts of fastening of the front bumper to the outside and the support brackets to the frame	8
Nuts and bolts fastening the rear bumper to the frame	8
Nuts of fastening straps mudguards	6
Nuts of fastening of the spare wheel to the beam frame	49
Screw support brackets to the holder of a spare wheel	25
Nuts of fastening of the reinforcing elements of the longitudinal beams of the frame	49
Bolts door latch to the uprights	24
Bolts of fastening straps side door hinge
By the door	35
For racks	32
Nuts of fastening of the terminator of opening the door to the door frames	10
Bolts of fastening straps Loop tailgate
To the door	55
By the roof panel	35
Tighten the screws on the exterior door handles
The front doors	3
Rear doors	15
Screws fastening assembly of door locks	8
Bolts striker tailgate	thirty
Anchor bolts seat belts	35
Tighten the screws on the instrument panel to the transmission tunnel	thirty
Bolts fixing lugs in the cargo floor panel trunk	24
Bolts anchor brackets fixing the child seat to the luggage compartment floor panel	24
Bolts seat frames to floor panels
The front seats	40
Backseat
Model release of 08.31.99	35
Models of release since 1.9.99	40
Bolts of fastening of the seat backs to the frames	30 ?� 3
Tighten the screws on the return of devices to the rear seat belts seats	40
Bolts seatbelt buckles
The front seats
Model release of 08.31.99	35
Models of release since 1.9.99	45
The rear seats	35
Wheel bolts	150
Bolts of the trailer coupling to the cross beam of the frame	160

Due to limited space in this chapter only the most interesting from the point of view of the drafters of the procedure, the implementation of which is impossible by the average mechanic-fan. More complex work to the implementation of service specialist.