Common parameters |
| The type and amount of grease SHRUS | |
| The types and amounts of lubricating fluids and distributing box differentials | |
| Drive shafts |
| Allowable lateral and radial play of the flange front and rear drive shafts (removal and centering) | 0.3 |
Efforts of a tightening of carving connections, Nanometer |
| Clutch |
| Bolts flywheel clutch | 25 |
| Drive shafts |
| Self-locking bolts driveshafts to the connecting flanges transfer case |
| The front shaft | 50 |
| Rear shaft | 40 |
| Self-locking bolts driveshafts to the connecting flanges differentials |
| The front shaft | 40 |
| Rear shaft | 50 |
| Bolts of fastening of the intermediate bearing rear propeller shaft to the bottom panel (screws and washers) | 40 |
| Coupling nut assembly intermediate bearing rear crankshaft | 150 |
| Self-locking coupling bolts of collars cardan joint assembly of the intermediate bearing | 20 |
Steering knuckle, hub assembly and drive shafts |
| Self-locking nuts of ball bearings of the front axle steering knuckle |
| The upper support | 50 |
| The lower support | 85 |
| Hub nuts | 490 |
| Self-locking nuts in the steering knuckle tips of steering drafts | 55 |
| Self-locking nuts hinges stretch in the hub of the rear axle assemblies | 55 |
| Self-locking nuts of ball bearings Hub rear axle assemblies |
| The upper support | 50 |
| The lower support | 125 |
| Bolts brake shields on the hub rear axle assemblies (M6) | 10 |
| Castellated nut securing the lower ball joints in the steering knuckle / Hub Assemblies | 300 |
| Hub nuts | 490 |
| Bolts support brackets wheel ABS sensors on the rear axle assemblies Hub | 10 |
| Transfer case |
| Bolts transfer case control module to the transmission tunnel | 8 |
| Bolts rear cross beam of the power unit to a body | 40 |
| Bolt / nut fastening the rear suspension support of the power unit to the transmission (M10) |
| Petrol models | 40 |
| Diesel models | 35 |
| Screw plug the transfer case | thirty |
| Bolts transfer case to the transmission (AT and Manual transmission) | 20 |
| Cover bolts to the transmission housing | thirty |
| Nuts of fastening of the transfer case output flange | 150 |
| Bolts servo to the transmission housing | 5 |
| Bolts servo to the transfer case | 10 |
| Bolts vibration damper to the transfer case | 20 |
| Bolts support bracket to the servo transfer case | 10 |
| Servo mounting nuts on the support bracket | 5 |
| Differentials |
| Front differential drain plug | 50 |
| Filler plug housings front and rear differentials | 50 |
| Bolts bridges to the subframe |
| Front axle | 135 |
| Rear Axle |
| 165 |
| 135 |
| Self-locking nuts of the front yoke rear differential |
| To the holder (M10) | thirty |
| To the bracket (M12) | thirty |
