Removal and installation of the traction relay of a starter

1. Remove the starter, refer to the appropriate section.
2.Zazhmite starter in the clamp. Jaws to protect Wrap cloth.

3. Remove the nut and remove the cable from the terminal (1) on the traction relay.

4. Remove the nuts (1) and remove the traction relay of a starter unit.

1. Grease an interfaced surface of the block starter sealant.
2. Connect the magnetic switch with starter unit and secure.
3. Secure the cable to the plug of the traction relay.
4. Check the starter before installation in the disconnected state.
5. Install the starter, refer to the appropriate section.