Removal and installation of facing racks A and B

1. Remove the edging along the rack A.

2. Remove with a plastic lining on the wedge brackets (1) Stand A (arrow in the illustration).

3. Remove the lining up of the rail on the instrument panel and remove it.

Installation is performed in reverse order of removal.

1. Move the seat forward.
2. Remove the belt from the front seat, as described in Section Removal and installation of front seats.
3. Remove the edging along the door frame rack B.

4. Remove the bracket with a screwdriver (1) in the top of the pillar B (arrow in the illustration) and remove the upper trim from the bottom of the lining.

5. Remove the belt from the upper cladding.
6. Remove the lower trim from the clips (2) (arrow in the illustration) and remove from the rack B.

1. Insert the bracket facing the top rack B.
2. Install the lower B-pillar trim from and fix it.
3. Perform the safety belt through the slot in the top wall.
4. Install the upper B-pillar trim from, and slide it under the lower trim.

5. Insert the pin (3) a seat belt in the support for the passage of the belt.

6. Insert the plug (4) button adjusting mechanism belt height.
7. Fix the upper trim at the front B.
8. Install the edging on the door frame.
9. Check the operation of the mechanism of adjustment of the belt adjustment.
10. Secure the belt 30Nm torque on the front seat.