printable version
Removal and installation of lateral traction
Withdrawal Remove the wheel. Remove the coil spring.
Unscrew the nut 1 and pull the connecting rod 2 of the stabilizer (Fig. 4.71). Remove the bolt transverse rods 3.
| Fig. 4.72. Bolts of fastening of the stabilizer bracket
|
Unscrew the nut and remove the bolt backwards.
Setting Install transverse traction on the car and tighten bolts by hand. Fasten tie rod should only be achieved when the size of ?�a?�. Screw the tie rod 1 to the subframe and tighten the new nut. Tighten the bolts to the stabilizer bracket. Remove the bolt transverse rods 3.
NOTE Make sure that between the nut and the housing of the wheel bearing washer was installed. |
Insert the connecting rod to the stabilizer 2, and tighten the nut 1. Install the coil spring. Install and tighten the wheel. Adjust the wheel alignment
|