printable version
Removing and installing coil spring
Withdrawal Remove the wheel. Insert the coupler spring 3.
ATTENTION Ensure the correct position of the spring in the spring retainer (risk of injury). |
| Fig. 4.82. Installation tools for tightening the spring 1 - spring retainer; 2 - adapter; 3 - tie springs
|
For twist tie springs, use a ratchet wrench or switch (Fig. 4.82). Spring is compressed until, until it becomes possible to extract it. Remove the spring.
Setting When installing observe the mounting position.
Starting spring should be pressed against the abutment of the lower support spring (Fig. 4.83). Install the spring with the support. On the lower spring seat has a pin.
Then set the top support to the upper end of the spring. Lift the spring, at the same time set the upper spring seat on the ledge of the body. Remove the coupler spring. Install and tighten the wheel.
|