printable version
Removal and installation of elements of the lubrication system
NOTE For assembly work the engine must be mounted on a retainer for the engine and gearbox VAS 6095. The oil level must not exceed the MAX mark - danger of damage to the catalyst. |
If the repair of the engine detected by a large number of metal chips, wear, it may be a consequence of damage to the bearing of the crankshaft and the connecting rod. to avoid further damage after repair, proceed as follows. Thoroughly clean the oil passages. Replace check valve drain oil. Replace the oil injection nozzles. Replace oil cooler. Replace the oil filter. The oil filling: with oil filter 6.3 liters. Specification of engine oil: Use motor oil ?�LongLife?� norm VW 503 00.
NOTE At the factory the engine is filled with engine oil at a rate of VW 503 00. |
Motor oils for standards VW 500 00 and 501 01 and 502 00 are allowed to use in the future. These oils should be replaced every 12 months or 15 000 km. To change or topping you can use engine oil "ILSAC GF3 with viscosity class SAE5W-40". It is necessary to properly program the LED mezhservisnogo run.
|