Removing and installing strut

Withdrawal

Remove the spring strut (Fig. 4.87).

Insert a wooden block between the bottom of A and the upper rear lever B (Fig. 4.88).

It is necessary to press down the bearing housing hub.

Unscrew the nut of the bolt (Fig. 4.89).

Then press the bearing housing with the help of a piece of wood down so that it was possible to remove the bolt.

Remove spring strut.

Setting

Installation is carried out in reverse order.

Tightening torques

Fixing strut to the body - 60 Nm

Strut to the bearing housing (Use the new bolt and nut) - 90 Nm + 90 ?�