 printable version
general description
NOTE The hood (bonnet contact switch F266) must be closed to activate the wiper. |
Wiper motor control unit J400 is integrated in the wiper motor V.
NOTE When replacing the wiper motor control unit J400 and the wiper motor V is necessary to make coding wiper control unit J400. |
Depending on the configuration can also be set rain sensor or rain sensor G213 and the level of illumination G397. The operation of the rain sensor G213 is activated by a switch intermittent wiper E22.
NOTE Rain sensor G213 determines the intensity of the rain and converts it into a corresponding signal. This signal is first received wiper motor control unit J400, which transmits it to the wiper motor V. |
Rain and light sensor G397 is in addition to the above-mentioned functions of the rain sensor G213, the function of ALS (special light switch). Function ALS (special light switch) is activated by a light switch E1.
| 
