 printable version
Keyless access
Engine start button keyless access
| Fig. 1.110. The center console: starter button for access without a key
|
Starter button (Fig. 1.110) performs all the functions of a normal ignition without a key. It is only necessary to carry the key with him, for example, in a pants pocket.
Options starter button To unlock the steering wheel, press the starter button once to the first stop. To turn the ignition, press the starter button a second time to the first stop. To turn off the ignition, press the starter button a third time to the first stop. To start the engine, press the button until the second stop. To stop the engine and ignition off, press the button again before the second stop. Press the button once until the second stop and hold it down for more than one second to lock the steering. If after stopping the engine you forgot to lock the steering, then, as soon as the car is locked from the outside, the steering lock.
Start the gasoline engine starter button Put the selector of an automatic transmission to position P or N. Place the gear manual transmission in neutral. Depress the clutch pedal all the way and hold it in this position. Keep the vehicle in place with the brake pedal. To start the engine, press the button until the second stop. After starting the engine is very hot you need a little push on the gas pedal. After a cold start it will be for some time to work with increased noise, as yet not large enough oil pressure valve tappet clearances. This is normal. If you can not immediately start the engine, it should be in 10 to suspend the process of starting. To do this, press the starter button to the first stop to turn off the ignition. Half a minute later, repeat the start-up
Start the diesel engine starter button Put the selector of an automatic transmission to position P or N. Place the gear manual transmission in neutral. Depress the clutch pedal all the way and hold it in this position. Keep the vehicle in place with the brake pedal. To unlock the steering wheel, press the starter button once to the first stop. To turn the ignition, press the starter button a second time to the first stop. When the preheating warning lamp. When the warning lamp is not lit (or is not lit), to start the engine, press the starter button to the second stop. After a cold start it will be for some time to work with increased noise, as yet not large enough oil pressure valve tappet clearances. This is normal.
Pre podogrevdizelnogo Engine During operation, the heating should not include powerful consumers of a current - will be too much load on the battery. Immediately, the warning lamp goes out starting heating should start the engine.
The diesel engine after running out of fuel from the tank If the fuel tank was completely empty when you first start the engine after fueling the startup process will take longer than usual - up to half a minute. The reason for this is that the fuel system should be free of air during starting.
Stopping the engine starter button Stop the car. To stop the engine and ignition off, press the button again before the second stop. After switching off the engine radiator fan may still rotate for 10 minutes, even when the ignition is switched off. The fan switches independently as in the hot engine coolant temperature increases due to an elevated temperature under the bonnet of the strong sunlight.
| 
