 printable version
The rear banquette seating
Rear stool occupies the entire width of the machine. On machines with two-cabin performance under the stool is a tool box. In this case, you can remove only the very surface of the seat. Removing normal stools for seating
| PERFORMANCE ORDER | | 1. Rasstoporit banquettes and fold back the seat. | | 2. Rasstoporit banquette and topple forward, now visible fixing screws. |  | 3. Unscrew the hexagonal screws (1) and remove the three-local banquette of the car. |
|
Setting
Installation is performed in reverse order of removal.
A warning  When installing hex screw tightening torque 35 Nm.
Removing benches for sitting machine performance dvuhkabinnogo
| PERFORMANCE ORDER | | 1. Rasstoporit rear banquette (1) locking lever and lift it up. | | 2. Pull the banquette forward until it stops. | | 3. Raise the banquette on the one hand as long as the guide pins (2) shall not enter into the upper connecting link. In this position, the stool is pressed to the outer side of the machine. |  | 4. Pull up the opposite side of the scenes banquettes console and remove the banquette seating on the diagonal from the console seat (3). |
|
| 
