 printable version
Check the tread profile
Tire balance the wheel, when operating with a prescribed air pressure, adjust their impeccable and flawless operation of shock absorbers wear out the entire length of the same tread. If you see uneven wear. Troubleshooting in Section 8.9.
Firm conclusions about the service life of tires of a brand can be given, since it depends on many factors:
- Road surface;
- Tire pressure;
- Driving style;
- Weather conditions.
A warning  Strong influence on tire wear wheels have a sporty driving, sudden starting and sudden braking.
Tread pattern
If the wear of the tread approaches the minimum allowed by law depth, this means that if applied to the entire length of the tread to a depth of 1.6 mm wear indicators are no more tread, these tires must be replaced.
A warning Tires S to M work effectively in a sticky mud and snow with a tread depth of at least 4 mm.
Check the tires on cuts and measure the depth of cut using a screwdriver. If the cuts affect the cord, the steel belt from moisture rusts. Depending on the circumstances behind the tread and the tire cord is broken. Therefore, deep cuts of the tread, based on security conditions, the tires replaced.
|
