 | 1. Place the lever wire so that the cables (1, 2, 3) were the most extended: the lever (5) (a damper driver's legs) to move to the end of the right (4) (a regulating valve), the left (6) ( a defroster damper) to the left. |
| 2. push the cable to the control valve via a transverse wall of the engine compartment and hang. |
 | 3. Move the lever (2) to the right until it stops (valve closed). Secure the braid on the cable clamp plate control valve (1). |
 | 4. Move choke lever defroster direction of the arrow until it stops and secure the braided cable. |
 | 5. Move the throttle lever for the driver's legs in the direction of the arrow until it stops and secure the braided cable. |
| 6. Adjusting the dampers: move the controller controls the heating from stop to stop. Adjust the cables themselves. |
