 printable version
Adjusting the front door
A WARNING Before adjusting the position of the front door is necessary to adjust the pre-tailgate. |
| Fig. 16.26. The gap between the doors and the front and rear wings: A - 3.0 ?� 1 mm; The - (4,5 ?� 0,5) mm; C - (3,5 ?� 0,5) mm
|
Check the gaps between the car doors and front and rear wings and, if necessary, adjust the position of the door (see. Fig. 16.26).
| Fig. 16.27. Location bolts of the bottom hinge to the A-pillar and front door: 1 - bottom hinge, 2 - bolts of the hinge to the front of the rack, 3 - front door, 4 - hinge bolts to the front door, 5 - front desk
|
To adjust the position of the doors in the axial direction, loosen the hinge bolts to the front of the rack 2 (Fig. 16.27), so that the door 3 with hinges could get mixed up in the elongated holes of hinges and the front pillar 5. Adjust the position of the door and tighten the bolts to 30 N hinges ?� m. To adjust the front of the door in the transverse direction to loosen the bolts to the front door hinge 4 so that the door 3 can get mixed up in the elongated holes of hinges 1. Adjust the position of the door and tighten the bolts hinges torque 30 Nm.
| Fig. 16.28. An arrangement of bolts (2) securing the hook (1) the front door lock
|
Adjusting the back of the door in the transverse direction is carried out by moving the hook lock 1 (Fig. 16.28) in the elongated holes after loosening the screws 2 fastening hook lock. After adjustment, tighten the lock hook bolts to 20 Nm.
|
