 printable version
The center console
Withdrawal Using a screwdriver blade is 10 mm angled 90 ?�, remove the rear ventilation grille of the center console. Disconnect the rear panel ventilation grill electric cigarette lighter sockets, lighting and heating switch back seats. Pull and remove the duct from the rear center console. At presence remove central armrest.
| Fig. 16.52. Centre console: 1 - central console; 2 - pad handbrake lever; 3 - nut 10 Nm; 4 - bolt 5 Nm; 5 - pad; 6 - the switch of adjustment of position of a mirror; 7 - bolts 5 Nm; 8 - the handle; 9 - a protective casing; 10 - Insert the center console; 11 - lock loop; 12 - stud
|
Remove the nut 3 (Fig. 16.52) securing the rear of the center console. Pulling up, remove the cover 5. 4 Remove the bolt located under the cover plate 5.
Vehicles with manual transmission Turn the knob 8 to the gear lever. Pull up and remove the protective cover 9 with the shift lever. Pull up and remove the center console box 10.
Cars with automatic transmission Pull up and remove the center console box 10.
All models 7 Remove the screws that secure the front of the center console. Lift up the parking brake lever.
| Fig. 16.53. Removing trim handbrake lever: 1 - finishing arm; 2 - sidewall; 3 - clips
|
Pinch along the sidewall 2 (Fig. 16.53) finishing 1 handbrake lever and remove the finish with 3 clips. Lift the front of the center console and remove the electrical connector from the controller to position the mirror 6 (see. Fig. 16.52). Remove the cover 2 (see. Fig. 16.52) with the handbrake lever. Hiking, remove the rear of the center console with the studs 12 (see. Fig. 16.52). Lift the rear of the console, and moving forward, lift it on the parking brake lever.
Setting Installation is performed in reverse order of removal.
| 
