 printable version
Removal, installation and adjustment of the audio signal
If the signal began to sound softer or wheezing, you can try to adjust. You will need: the key "13", flat-blade screwdriver. 1. Disconnect a wire from the plug "minus" of the storage battery. | | 2. Remove the nut sound. | 3. Disconnect the wires from the audio signal and remove it. |
4. To adjust, connect to the audio signal wires and wire to the plug "minus" of the battery and ensure good contact sound to "weight" of the car. 5. Press the horn switch (this must be an assistant) and turn the adjusting screw in either direction until you get the sound loud and clear sound. If it failed to do, replace the buzzer. 6. Install the parts in reverse order of removal.
| 
