REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Chevrolet
	Lanos
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
			Design Features
			Compression check in cylinders
			Removal and installation of mudguards of the engine
			Mount Replacement power unit
			Installation of the piston of the first cylinder to TDC of the compression stroke
			Removal, installation and Troubleshooting flywheel
			Replacement parts Seal Engine
			Cylinder Head
			Removing and installing engine
			Engine repair
			Lubrication system
			Cooling system
				Design Features
				Possible failure of the cooling system, their causes and remedies
				Removal and installation of electric fans cooling radiator
				Replacing the heat sink cooling system
				Replacing the water pump
				Removing and installing thermostat
				Removal and installation of the expansion tank
			Exhaust
			The power supply system of the engine
			The system EVAP
			Exhaust gas recirculation
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Wheels and tires
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Tips novice mechanic
		Applications
		Diagrams

Removal and installation of electric fans cooling radiator

You will need to face head "10".

1. Disconnect a wire from the plug "minus" of the storage battery.


2. Disconnect the harness connector of the main fan by clicking on a spring clamp.	3. Remove the two upper bolts ...


4. ... and a lower bolt to the radiator fan shroud and remove the core with the fan shroud assembly, moving the emphasis housing, located at the bottom right of the bracket on the radiator.	5. To remove the optional fan, disconnect the harness connector him in the same way as it was done before removing the main fan (see. P. 2).


6. Remove the two screws on the blower housing to the radiator ...	7. ... and remove the optional fan assembly to the housing assembly, moving stops casing at the bottom right and left of the brackets on the radiator.

8. Place the electric fans in reverse order of removal.