add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Technical data
Instructions for use of the refrigerant
Remarks at replacement of elements of the air conditioning system
Merging an air-conditioning system
Safety measures
Setting gauges for pressure measurement
Discharge the air conditioning system
The evacuation of air from the air conditioning system
Connecting the exhaust valve to the cylinder with the refrigerant
Charge air-conditioning system
Verification performance
Oil for air conditioning compressor
Check and adjust the tension of V-ribbed belts
Air conditioning compressor
Bushing clutch pulley and the air conditioning compressor
The excitation coil clutch
Checking clutch clearance
Blower, and relay
Receiver Drier
Triple Sensor (double) Pressure
Block heating and ventilation
Fan
Air filter
Damper actuator supply fresh / recirculated air
Check the fan motor
Relay test
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Block heating and ventilation



Withdrawal

PERFORMANCE ORDER

  1. Disconnect the negative battery terminal.
  1. Disconnect from the front seats, electric sockets and remove the seat.

When removing the front seats do not damage the upholstery of the car.

  1. After removing the handle from the gear lever, the blade flat screwdriver to remove the top cover of the console.
  1. Remove the screws and remove the floor console.
  1. Remove the side cover from the floor console.
  1. Remove the driver airbag.

To remove the airbag, see corresponding description.

  1. Remove the steering wheel.
  1. Unscrew the bottom of the column cover and remove it.
  1. Remove the coil spring driver's airbag.
  1. Disconnect the connector and remove the multi-selector.
  1. Unscrew the instrument cluster.
  1. Remove the ashtray, then remove the screws fixing the instrument cluster and remove it.
  1. Disconnect the connectors from the instrument cluster.
  1. Remove the instrument cluster.
  1. Remove the radio and air conditioning control panel.
  1. Unscrew the bottom decorative panel located under the dashboard.
  1. Unscrew the side bezel and remove it from the instrument panel.
  1. Remove the bracket support the instrument panel on the driver side.
  1. Remove the bolts of the steering column and remove it.
  1. Remove the trim from the front door and lower A-pillar trim.
  1. Disconnect the connectors from the instrument panel.
  1. Remove the grille heater and remove bolts dashboard.
  1. Remove the side cover from the bottom of the instrument panel and remove bolts dashboard.
  1. Remove the instrument panel bolts to a central arm and the glove box.
  1. Remove the remaining bolts dashboard.
  1. Remove the instrument panel.
  1. Remove the nut evaporator.
  2. Remove the evaporator.
  3. Remove the nuts that secure the front crossmember of the engine compartment and remove it.
  4. Remove the nuts heater.
  5. Remove the heater.

Setting

Installation is spent to sequences, return to removal, taking into account the reliable connection of all the connectors.





« previos page
Triple Sensor (double) Pressure		 next page »
Fan

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.