add to favorites

REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Hyundai Elantra

Home

Hyundai
	Elantra
		Gasoline engines 1.6, 1.8 and 2.0 liters
		The diesel engine of 2.0 liters
		Greasing system
		Cooling
		Fuel system
		Control systems and emission control
		Ignition system
		The system of preliminary heating of the diesel engine
		Coupling
			Technical data
			Adjust the clutch pedal
			Bleeding the hydraulic clutch
			Guided and clutch pressure plate
			Clutch Master Cylinder
			The clutch pedal
			Clutch slave cylinder
			Troubleshooting
		Manual transmission
		Automatic Transmission
		Drive shafts, front and rear axles
		Suspension
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

Hit Counter by Digits

printable version

The clutch pedal

Withdrawal

PERFORMANCE ORDER

Remove the cotter pin, washer and a pin with a head and a hole for the pin.
Remove the bolt from the clutch pedal.

Check

PERFORMANCE ORDER

Check the pedal arm and the sleeve for wear.
Check the clutch pedal in the absence of bending and deformation.
Check the return spring for damage and loss of elasticity.
Check the clutch pedal pad for damage and wear.

Check for continuity between the terminals switch the ignition lock.

Setting

PERFORMANCE ORDER

Install parts in reverse order of removal.

Before installation grease sleeve, pin, washer and a pin with a head and a hole for the pin.

Install the pushrod to the clutch pedal.

Adjust the length of the pusher.

« previos page
Clutch Master Cylinder

next page »
Clutch slave cylinder

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.