REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Jeep Grand Cherokee (from 1993 to 1999, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Jeep
	Grand Cherokee
		Introduction
		Adjustment and routine maintenance
		The straight six-cylinder engine
		The V8 engine
		Procedure of the general and engine major repairs
		Systems of cooling, heating and air conditioning
		The power supply system and exhaust
		The system of electric motor
		Systems of decrease in toxicity of the fulfilled gases and engine management
		Manual box of a gear change
		Automatic Transmission
		Transfer Case
		Clutch and transmission line
		Brakes
		Suspension and steering
		Body
		The system of on-board electrical equipment
			general information
			Troubleshooting electrical chassis - general information
			Safety locks - the general information
			Fuse - General Information
			Circuit breakers (thermal relays) - the general information
			Relays - General Information
			Check and replacement of the breaker of indexes of turn / alarm
			Check of serviceability of functioning and replacement universal stalk
			Check and replace the ignition switch / lock cylinder
			Check of serviceability of functioning of the switch heating glass tailgate
			Check and repair the heater glass tailgate
			Replacing bulbs headlights
			Tilt the head block headlights
			Removal and installation of towers head block headlights
			Replacing bulbs
			Removal and installation of switches headlights and tailgate window wiper
			Removal and installation of radio and speakers
			Removal and installation of the antenna
			Check functioning and replacement of the wiper motor
			Removal and installation of the instrument cluster
			Check of functioning and replacement horn
			Description of the principle of operation and diagnosis of the speed control (Tempostat)
			Operation principle and diagnostics of electric lowering-raising glasses
			The principle of operation and test the central locking system and open the door without a key
			Principle of operation and check of serviceability of electric repositioning seats
			Principle of operation and check of serviceability of electric rearview form
			Airbag - general information
			Wiring diagrams - General information
			Location and Function relays and fuses
		Controls and operation receptions

printable version

Replacing bulbs headlights

Halogen lamps head block headlights are filled with pressurized gas and may explode if scratching or impact. Wear safety goggles and avoid contact with the lamps as gently as possible, keeping them only for the base. Try not to touch the surface of the bulb with bare fingers, as getting fat from the skin of the hands leads to overheating of the lamp when working, and its premature failure. Accidentally touching the flask immediately wipe the surface with alcohol.

PERFORMANCE ORDER

Disconnect the negative wire from the battery.
Open the hood.
Disconnect the electrical connector at the rear of the assembly of the headlight. Where necessary to provide access to the socket, remove the body assembly (Section Removal and installation of towers head block headlights).

Disconnect the electrical connector head lamp headlights.

Turn the lock ring counterclockwise and remove the bulb from the headlight housing

Turn the lock ring counterclockwise and remove the headlight assembly from the housing block headlights.

Insert the bulb into the housing and secure it with a retaining ring and connect the electrical connector.

« previos page
Check and repair the heater glass tailgate

next page »
Tilt the head block headlights