REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Jeep Grand Cherokee (from 1993 to 1999, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Jeep
	Grand Cherokee
		Introduction
		Adjustment and routine maintenance
		The straight six-cylinder engine
		The V8 engine
		Procedure of the general and engine major repairs
		Systems of cooling, heating and air conditioning
		The power supply system and exhaust
		The system of electric motor
		Systems of decrease in toxicity of the fulfilled gases and engine management
		Manual box of a gear change
		Automatic Transmission
			general information
			Troubleshooting - General Information
			Removing and installing selector lever
			Check and adjustment of a cable switch
			Description, replacement and adjustment of the throttle cable mode kickdown (TV-cable)
			Check of adjustment and replacement of the gauge-switch of the permission of start
			Adjustment of a cable parking bollard
			Check and replacement of support of transmission
			Replacing the gland
			Description of the construction, removal and installation of lines and transmission cooling hoses
			Removal and installation of additional cooling
			Removing and installing automatic transmission
			Replacing the transmission control module (TCM) (only for the AW-4 and 42RE)
			Diagnosis of electronically controlled automatic transmission
		Transfer Case
		Clutch and transmission line
		Brakes
		Suspension and steering
		Body
		The system of on-board electrical equipment
		Controls and operation receptions

Removing and installing selector lever

PERFORMANCE ORDER

Disconnect the negative wire from the battery.
Remove the handle with the gear lever knob. Grasp it and pull sharply, taking off from the lever.
Remove the bracket (head body).
Give fixing screws and remove the bracket console (Chapter Body).
Give nuts assembling the shift lever to the base cover of the floor panel.

Assemble the shift lever knob.

Lift the lever switch assembly, thus providing access to the cable.
Disconnect the shift cable and lock (See. Sections Checking and adjustment of the shift cable and Cable Adjustment parking lock, respectively).
Remove the shift lever assembly.
Install in reverse order.