REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
			Design Features
			Replacement bumpers
				Removing and installing front bumper and dismantling
				Removing and installing rear bumper, his amplifier and their attachment brackets
			Removal and installation of a mudguard and front wheel arch liner
			Removing and installing the rear wheel mudguard
			Removal and installation of a forward wing
			Removing and installing bonnet
			Door
			The trunk lid
			Removal and installation of facing the boot
			The fuel filler flap
			Seats
			Supplemental Restraint System
			Rear view mirrors
			Dashboard
			Removal and installation of the instrument panel
			Heater and air conditioning
			Interior fittings
			Replacing a windscreen
			Care body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

Removing and installing front bumper and dismantling

You will need: the keys "10", "14", Phillips screwdriver blade.

1. Disconnect a wire from the plug ?�-?� the storage battery.

2. Remove clips eleven caps fastening lining grille ...

NOTE

Since the pistons are arranged fixing plates grille.


3. Remove the caps ... ...	4. ... and remove the cover.


5. Remove the two screws that secure the frame license plate to the bumper ...	6. ... and remove the frame.

7. Remove the headlight (see. "Replacing the headlight").

9. Disconnect from the fog light (see. "Replacing the front fog lamp").


10. Remove the two locking caps at the bumper openings block headlights ...	11. ... and remove the caps.


12. Remove one of the mounting nuts bumper aperture lens unit ...	13. ... and remove one screw securing the bumper in the opening of the wing.


14. Remove the two locking caps fixing the bumper under the license plate ...	15. ... remove the caps ...


16. ... and remove the bumper.	17. Remove one nut of the top fastening of the grille to the bumper ...


18. ... the four screws securing the bottom of the grille to the bumper ...	19. ... and remove the grille.


20. Remove the two screws on the amplifier bumper brackets ...	21. ... and remove the amplifier from the vehicle bumper.

22. Install the front bumper, radiator grille and bumper amplifier in the reverse order of removal.