REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
			General provisions
			Daily maintenance (EO)
				Check wheels
				Checking and topping up the coolant
				Checking and topping up the oil in the lubricating system
				Checking and topping up the brake fluid in the master cylinder reservoir and master cylinder clutch
				Checking and topping up the oil in a manual transmission and the hydraulic fluid in the automatic transmission
				Checking and topping up the hydraulic fluid in the power steering reservoir
				Checking and topping up the fluid in the washer tank
			The first maintenance (1)
			The second maintenance (TO-2)
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

printable version

Checking and topping up the fluid in the washer tank

You will need: the summer - a special liquid concentrate to the washer fluid reservoir, diluted with clean water; winter - freezing liquid.

HELPFUL HINTS

Use antifreeze liquid production of well-known companies, do not contain hazardous methanol.

Do not dilute in order to save antifreeze fluids at elevated ambient temperature. In addition to raising the freezing point of the diluted liquid, sharply deteriorate its cleaning properties.

WARNINGS

The manufacturer does not recommend the use of plain water to fill the washer fluid reservoir.

The freezing of the liquid in the washer tank will lead to its destruction and replacement of labor-intensive (tank mounted in the cavity of the right front wing of the car)!

Checking and topping up the fluid in the washer tank

Washer reservoir filler neck is located in the engine compartment (in the front part) near the right headlight.

1. The liquid level in the tank windshield washer should be between labels ?�FULL?� (full) and ?�EMPTY?� (blank).


2. To fill the washer fluid reservoir remove the cap ...	3. ... and add a liquid in a tank to mark ?�FULL?�.

« previos page
Checking and topping up the hydraulic fluid in the power steering reservoir

next page »
The first maintenance (1)