Installation of the power unit

Installation of the power unit on the vehicle is carried out in sequence, return to removal, taking into account the following:

- Check for damage and replace if necessary all the mountings of the power unit and all the oil and fuel lines;

- Check the condition of the bearing clutch assembled on the power unit and replace if necessary;

- Without securing the power unit on the chassis and the support members without releasing rope slings, not to install it on the engine parts removed;

- Attach the propeller shaft (see. The appropriate section);

- Check the oil level in the engine and gearbox and top up if necessary. If the engine oil is blended, for its full-fill (both types of engines) would require 9.5 liters of motor oil recommended by the company;

- Before filling the cooling system is necessary to check whether all the drain plugs and valves closed. The cooling system should be poured antifreeze in the following amounts: 7 liters engine capacity of 2.3 liters and 7.5 liters engine capacity of 2.9 liters;

- The tightening of the threaded fasteners to hold to the required torque.