Shift of wheels

Tyre wear can be somewhat reduced by the permutation pairs of wheels on one side (same direction). In this case, the wear will be more uniform. The disadvantage: the wear and tear have to replace all four tires. In addition, due to the reshuffle at regular intervals run harder to identify possible violations of the suspension, steering and shock absorbers. When replacing, always make sure that in any case on the same axle tires were mounted one brand, with the same profile and service life.

If you do not perform rearrangement of wheels as described above, there is another option. Tires axle (in this case back) wear faster. If the rear tires are worn, in their place establish the bus from the front wheels, the wear which is probably not less than the established norms limit - 1.6 mm. Thus, you need only two new tires. When the rear tires wear out again, they were also replaced with new ones.