REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz M-Class (W163, 1997 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W163
		Introduction
		Controls and receptions of safe operation
		Current care and maintenance
		Engine
		System of cooling, heating and air conditioner
		The power supply system and exhaust
		Systems of an electric motor
			Ignition and engine control
			System of preheat of the diesel engine
				Check glow plugs
				Removing and installing glow
				Removing and installing coolant temperature sensor (ECT)
			Diagnostics of systems of electronic control and diagnostic equipment
			Charge and start systems
		Manual box of a gear change
		The transmission automatically processed
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
		Onboard electric

printable version

Removing and installing glow

Details of the installation of the diesel engine glow plugs

PERFORMANCE ORDER
Details of installation of glow plugs are shown in the illustration, which includes all the links in the text.
Start the engine and warm it up to normal operating temperature (80 ?� C).
Reversing candles should be made only after the warm-up cylinder head!
Stop the engine.
Disconnect from a fuel distributive highway going to the injection pump fuel return line.
Disconnect the wiring (3) (see. Section Checking glow plug) and with the help of a special device (HAZET 4760-1) remove the candles (R9).
Installation is performed in reverse order - do not forget to clean the spark plug niche special perlon brush with a diameter of 10 mm or 6.
Finally, start the engine and check the power supply system for signs of leaks.

« previos page
Check glow plugs

next page »
Removing and installing coolant temperature sensor (ECT)