Removing and installing rear seat

1. Remove the rear seat and fold it forward.
2. Move in the direction of the mat and remove the nuts under the seat belt.

3. Again fold back the seat, remove the cover under the seat and loosen the nut (1) securing the hinges.

4. Remove the rear seat from the floor and pull it out.

5. Remove the bolt (1) securing the side of the rear seat back cushion and remove the pad from the holder jerk.

6. Move aside the mat and remove the bolt between the rear seat cushion and seat back.
7. Remove the bolt of the seat belt buckle on the floor of the car.
8. Remove the two screws on the right hinge pins from the outside of the wheel arches.
9. Remove the clamp nuts on the floor of the car.
10. Release the seat back and fold it forward.

11. Remove the remaining nut (1) securing the clamp support (2).

12. Remove the thrust release seatbacks.
13. Take the third right back.
14. Remove the 2/3 backrest hinge pins on the left.

Installation is performed in reverse order of removal.