REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	G-class
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Automatic Transmission
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
			Specifications
			Front suspension
			Rear suspension
				Overview
				Removing and installing rear axle assembly
				Removal, check and installation of the rear shock absorbers
				Removal and installation of the front suspension springs
				Removing and installing rear stabilizer bar
				Removing and installing trailing arm suspension
			Steering
			The suspension geometry
		Body
		Onboard electric
		Wiring

Removal, check and installation of the rear shock absorbers

The design of the upper strut

Location rear shock absorber lower support

PERFORMANCE ORDER

Release nut (1), then remove the plate (2) with a rubber sleeve (3) and release the shock from the upper support bracket (4).
Remove the damper holder (5 and 8), the rubber bearing (6) and spacer sleeve (7).
Release nut and remove the bolt (arrow) and remove the shock absorber from the lower leg.
Assess the rubber components of the failed elements replace.
Inspect the damper for evidence of leakage from the shaft collar workers, if necessary, prepare a removable assembly.
Installation is in the reverse order. Ensure that the fixture has been tightened with demanded effort.