REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Patrol (from 1988 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Patrol
		Introduction
		Troubleshooting
		Adjustment and routine maintenance
		Engine
		System of cooling, heating and air conditioning
		The power supply system and exhaust
			The power supply system of carburettor engines (3.0 liter and 4.2 liter earlier)
				Removal and installation of the air and the dust separator prefilter
				Removal and installation of the fuel filter
				Carburetor Service
				Service of the fuel pump
				Service solenoid valve fuel return - only l models 3.0
				Service the throttle cable
				Service cable of a manual throttle actuator
				Service fuel tank
			Fuel injection system (EFI) and engine management - models 4.2 l of release after 1992
			Exhaust
		Systems for reducing emissions
		Systems of an electric motor
		Transmission
		Clutch
		Brakes
		The front and rear axles, chassis and steering
		Body
		Onboard electric

Removal and installation of the air and the dust separator prefilter

The layout of the components of the air intake tract

Withdrawal

PERFORMANCE ORDER

Remove one or more of the wing nuts securing the top cover of the air cleaner assembly (components of air cleaner 4.2 l presented on an accompanying illustration).

1 - top cover
2 - wing nuts
3 - the filter element
4 - a device the lean at idle when the engine
5 - thermostatic valve
6 - housing

Release the clamp on the lid.
Remove the top cover and remove the air cleaner housing filter element.
Give bolt the air intake to the heater assembly.
Disconnect from the cylinder head cover the air vent hose.
Give bracket bolts the air.
Lift the air cleaner, then disconnect the vacuum hoses, preliminary having marked their identification marks.
Remove the air cleaner assembly from the vehicle.
Loosen the clamp duct dust separator.
Give fixing bolts and remove the heater assembly from the vehicle.
Give bolts of the dust separator to the mudguard. Remove the dust separator from the vehicle.

Setting

Installation is in the reverse order.

PERFORMANCE ORDER

If necessary, make maintenance of the air cleaner in accordance with the instructions.
Make sure that the vacuum hoses are connected in accordance with applied during the dismantling of an identification mark.