REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Patrol (from 1988 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Patrol
		Introduction
		Troubleshooting
		Adjustment and routine maintenance
		Engine
		System of cooling, heating and air conditioning
		The power supply system and exhaust
		Systems for reducing emissions
		Systems of an electric motor
		Transmission
			Manual box of a gear change (Manual transmission)
			Automatic Transmission
				Checking and adding transmission fluid
				Transmission Fluid Replacement
				Service gauge-switch of the permission of start
				Adjustment of draft of the selector
				Service switch power state
				Service selection switch of raising transfer (models of late years of release of 4.2 l EFI)
				Removing and installing transmission
				Adjusting the brake bands (model 4.2 liter EFI)
			Transfer case
			Drive shafts
		Clutch
		Brakes
		The front and rear axles, chassis and steering
		Body
		Onboard electric

Service selection switch of raising transfer (models of late years of release of 4.2 l EFI)

PERFORMANCE ORDER

Using a small screwdriver, carefully remove the switch from the front of the selector lever handle (see. Accompanying illustration).

Give the screw and remove the switch from the handle lever.
Check the operation of the circuit breaker:
1. In the OFF switch for continuity between terminals should take place
2. In the ON position of conduction should not be.
If necessary, replace the switch.
Installation is in the reverse order.