 printable version
Fuses, relays and fuses
Check and replace the fuse  | To replace a failed fuse with a corresponding at rated current (see. Markings on the body of the fuse). Installing the fuse of higher current can cause damage to electrical wiring and fire. |
 | | Mounting the fuse box models with right-hand drive is located under the right corner of the instrument panel (see. Accompanying illustration). |
|
| - Remove the cover from the mounting block and Study the information on it to locate the fuse protection of various circuits.
- Remove the fuse from the slot in the unit and visually inspect its condition.
- In the absence of external signs of damage Check the fuse in the presence of conductivity using an ohmmeter or a lamp-sampler.
- Defect fuses to replace corresponding to the parameters.
- If you replace the fuse circuit still does not function or the new fuse immediately fails, check the chain for the presence of a short circuit, or consult a qualified electrician.
|
|
Check and replacement of fuse-links | To replace the fuse, use only firm manufacturing and insert the same parameters. Installation inserts, designed for higher current can cause damage to electrical wiring and fire. A new fuse should only be installed after finding and removing the causes of failure of the old one. |
| The main fuse (s) located on a bracket near the battery (see. Accompanying illustration). |
| - Disconnect the negative wire from the battery.
- Disconnect the fuse-link.
- Check the box for external signs of overheating.
- With proper external state check box in the presence of conductivity using an ohmmeter or a lamp-sampler.
- The failed insert, replace the new battery and connect Check the operation of the corresponding circuit.
- If the contour is still functioning, or a new insertion immediately fails, check the chain for the presence of a short circuit, or seek help from a professional electrician.
|
|
Location relays | Electrical relay systems are located at different points of the vehicle. |
 | Relay auxiliary accessories, ignition systems and heating systems are located in the fuse box mounting. Other relays are secured in a metal cover close to the battery (see. Accompanying illustration). |
Identification of the location of each relay is applied to the reverse side of the cover. Timer door lock, circuit breaker and power window switch located behind the glove box.
|
