 printable version
Rear wiper Service
Removal and installation of the brushes and the operating element  | Procedures similar to those described for the windscreen wipers (see. Accompanying illustration). |
Removal and installation of the wiper arm Withdrawal | - Remove the tailgate spare tire.
- Remove the cover and take the nut on the axis of the lever.
 | - Gently prying, remove the lever from the axis (see. Accompanying illustration).
|
|
|
Setting Installation is in the reverse order. | - Slide the lever on the axle and align the brush, placing it in a 55 ÷ 65 mm over the glass sealing tape. Motor should first put in park position.
- Tighten the nut on the axis of the lever.
|
|
Removing and installing wiper motor drive Withdrawal | - Disconnect the negative wire from the battery.
- Remove the wiper arm.
- Remove the interior trim of the tailgate.
- Disconnect the electrical connector on the motor.
- Give fixing bolts (see. Accompanying illustration) and remove the engine from the car.
|
|
Setting Installation is in the reverse order. | - Check the quality of the contacts of an electric socket and track reliability of its fastening.
- Tighten the bolts of the motor.
- Adjust the position of the brush on the glass.
|
|
| 
