 printable version
Cylinder Head
| Fig. 2.289. The components of the cylinder head: 1 - the upper part of the cover of a gear belt; 2 - toothed timing belt; 3 - a bolt 100 Nm; 4 - a bolt 25 Nm; 5 - a gear wheel of a camshaft; 6 - a nave; 7 - a bolt 10 Nm; 8 - cylinder head; 9 - cable connection unit injectors and glow plugs; 10 - a bolt 25 Nm; 11 - eyelet for hanging; 12 - sealing head cover; 13 - the cylinder head cover; 14 - Blow; 15 - sealing lip; 16 - a cover; 17 - bolt 10 Nm; 18 - a bolt of the cylinder head; 19 - seal; 20 - pump tandem; 21 - a bolt 20 Nm; 22 - Hall sensor; 23 - bolt 10 Nm; 24 - rear cover toothed belt; 25 - a nave
|
NOTE Included in repair kit plastic lining to protect the open valves are allowed to remove just prior to installation of the cylinder head. When replacing the cylinder head and drain the old and fill with new coolant.
|
Checking cylinder head for warpage
Using a straight edge and feeler gauge, check the surface of the cylinder to warping. The maximum allowable curvature of 0.1 mm
NOTE Additional processing of cylinder heads is prohibited. |
| 
